Compression molded
- Better for large diameters and thicker walls
- Higher density and lower internal stress
- Best dimensional stability during machining
- Preferred for heavy-load bearing and sealing parts
Kaxite Extrusion PTFE Rod is produced by ram or paste extrusion of virgin PTFE resin, giving a continuous, uniform round bar with excellent dimensional consistency and long standard lengths. Compared with molded rod, extruded rod is more economical for small and medium diameters and is the standard choice for machining seals, bushes, gaskets and precision electrical parts.
Available in white and custom colors, in virgin and filled grades, with diameter ranges from 5 mm to 200 mm and lengths up to 1000 mm. Cut-to-length and fully machined components are supported to drawing.
Self-lubricating surface with one of the lowest coefficients of friction of any solid material.
Resistant to acids, bases and most solvents — does not react with or contaminate media.
Continuous working temperature up to 250 °C, with service range from cryogenic to high heat.
Among the best electrical insulation of any plastic — ideal for high-frequency and HV parts.
Low adhesion surface, suitable for food contact and pharmaceutical applications.
Uniform structure and stable diameter along the full rod length for predictable turning results.
Base material for machining PTFE seals, bushings, gaskets and V-rings across chemical and process equipment.
Insulators, spacers, standoffs and dielectric components for high-frequency and high-voltage applications.
Rollers, guides, seals and contact parts where non-stick and non-contaminating behaviour is required.
Low-friction and chemical-resistant components in fuel systems, brake components and hydraulic systems.
Valve seats, liners, pump parts and corrosion-resistant internals for aggressive chemical service.
Wear plates, slide pads, piston rings and non-lubricated bearing components in industrial machines.
Diameter in mm and the required cut length, or send the finished part drawing.
Virgin PTFE for standard use, filled grade for higher load or wear resistance.
Number of rods or number of finished parts per size.
Required delivery date and destination port so we can schedule production.
Material certificate, dimensional inspection report or project-specific requirements.
Send your diameter, length, grade or finished part drawing — our engineers will reply with pricing and lead time within 24 hours.
Related products: PTFE Molded Rods PTFE Molded Rod PTFE Tubes PTFE Sheets PTFE Gaskets
Address
No 432 Zhenhai Middle Road, Luotuo Street, Zhenhai District, Ningbo City, Zhejiang China
